Basic Info.
Nature of Source Flow
Active Inverter
Certification
SAA, CE, ROHS, ISO9001
Power Source
Solar Power, Wind Power
Circuit Topologies
Full-Bridge Type
Nature of Wave String
Sine Wave Inverter
Rated Output Capacity
1kVA
Rated Input Voltage
DC 24V
Over-Charge Protect Voltage
DC33V
Over-Charge Recovery Voltage
DC28V
Over-Discharge Protect Voltage
DC 24V
Transport Package
5-Ply Wooden Box
Origin
Qingdao, Shandong, China
Product Description
Pure sine wave inverter for wind & solar power system,Single-phase pure sine wave inverter for wind turbine
Model | MAX1000-24 | MAX1000-48 |
rated output capacity | 1KVA |
Rated Battery Voltage | DC24V | DC48V |
over-charge protect voltage | DC33V | DC66V |
over-charge recovery voltage | DC28V | DC56V |
over-discharge recovery voltage | DC24V | DC48V |
no-load current | 0.6A | 0.3A |
output wave | single-phase pure sine wave |
display modes | LED |
cooling modes | Intelligent forced air cooling |
rated output voltage | AC110V,120V,220V,230V,240V |
waveform distortion rate | ≤4% |
output frequency | 50/60HZ±0.05 |
dynamic response | 5% |
overload capacity | 120% 30 seconds;150% Until the short circuit |
contravariant efficiency | max92% |
noise(1m) | ≤40DB |
insulating strength | AC1500V 1min |
protect function | over-charge/over-discharge/reverse-connection protect,output overload and short circuit protect, overheating protect |
service temp | -20~50ºC |
service elevation | ≤4000m |
ambient humidity | 0~90%, no moisture condensation |
package size(lenth×width×height)mm | 420 ×220 ×280 |
packed weight(KG) | 16 |
The above parameters can be adjusted according to the requirements |
The Company reserves the right to change products without prior notice |
Design Characteristic
Pure sine wave output: compared with square wave and corrected sine wave(staircase), this design has a better on load effect and stronger on load capacity. This equipment can support inductive load, and any other types of general AC load devices, such as refrigerator, television and radio etc. equipments, no interference and noise, and not affect the loading equipment's performance and life.High stability: this system has protection function for overvoltage, under-voltage, overload, overheating, short circuit, reverse connection, so as to ensure the stability.LED indicator: indicate the protection status and battery voltage status.High-efficiency transformer isolation: high efficiency, low no-load loss.Digital intelligent control: core device uses powerful single-chip microcomputer for control, peripheral circuit uses simple structure; powerful control mode and flexible control strategy can ensure excellent performance and stability.Optional back-to-back switch: The back-to-back switch can automatically switch the load to the grid power supply when battery is shortage voltage or inverter device happens failure, so as to guarantee the stability of the power supply;
Function introduction
1. Inverter output function: turn on the "inverter switch" in the front panel, the inverter immediately transfers the electric energy into pure sine wave AC, then exports it out from "AC output" in the rear panel;
2. Automatic voltage regulation function: when the battery voltage fluctuates between under-voltage point and over-voltage point, and the load changes within the rated power, the device can automatically regulate voltage output.
3. Overvoltage protection function: when battery voltage goes higher than the "overvoltage point", the device will automatically cut off the inverter output, "battery status" indicator light will flash on the front panel, at the same time, the buzzer will have alarm sound. When voltage drops down to "overvoltage recovery point", the inverter back to work.
4. Undervoltage protection function: when battery voltage is lower than "under voltage point", in order to avoid damage to the battery discharge, the device will automatically cut off the inverter output; Under this condition, "battery status" indicator light will flash on the front panel, and at the same time, the buzzer makes alarm sound. When voltage increases to "under voltage recovery point", the inverter back to work. If the back-to-back switch is selected, the system will automatically switch to grid output if under-voltage.
5. Overload protection function: if AC output power surpasses over rated power, the device will automatically cut off the inverter output, "protection status" indicator light flashing on the front panel, meanwhile buzzer makes alarm. Close the "inverter switch" in front panel, "overload" disappear. Before re-start, check and make sure if the load condition is within the allowed range, then open the "inverter switch", restore the inverter output.
6. Short circuit protection function: if the AC output happens short circuit, this device will automatically cut off the inverter output, "protection status" indicator light flashing on the front panel, meanwhile buzzer makes alarm. Close the "inverter switch" in front panel, "overload" disappear. Before re-start, check and make sure the output circuit no problem, then open the "inverter switch", restore the inverter output.
7. Overheating protection function: if the inside part of internal control occurs over-temperature, the device will automatically cut off the inverter output, "protection status" indicator light keeps bright on the front panel, meanwhile buzzer makes alarm. After the temperature returned to normal, restore the inverter output.
8. Battery reverse connection protection function:
First of all, Battery reverse connection is strictly prohibited!!!
Equipment has perfect battery reverse connection protection function, once reversed the battery positive and negative polarity, over-current protection switch on the inverter case will trip automatically to avoid damage to the battery and equipment.
9. Optional back-to-back switch function: if choose the back-to-back switch function, when battery is shortage voltage or inverter device happens failure, the device will automatically switch to the gird power supply load, so as to guarantee the stability of the power supply. After the inverter back to normal work, it will automatically switch back to inverter power supply.
After-sale service
Warranty promise: this machine guarantee one year free warranty, and life-span maintenance.
If damaged by fault operation, we will charge for maintenance or replacement costs according to actual situation!
Address:
on Middle of Shuangzhu Road, Huangdao District, Qingdao City, Qingdao, Shandong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components
Management System Certification:
ISO 9001
Company Introduction:
Pioneer committed to produce and supply small scale wind power equipment, solar energy equipment and other renewable products;
76 employees started from 2008, legally registered in 2010, HQ located in Weifang City, warehouse factory located in Qingdao city;
Annual sales performance reach 2000, 0000 in 2014, total sales performance 10000, 0000,
The high-tech enterprise integrated with R&D, products with CE and ISO9001-2000 certificate.
After years of deep plowing and careful cultivation, currently own a number of patented technologies.
Manufacturing technology and production equipment are advanced, most components are mold production.
The company from initial technical design, manufacturing, testing maintenance, etc., have formed a complete management system
Currently the company plays an important role in supply small wind power projects in China and wind solar complementary solutions, main products are wanted and loved on the international market, get the praise of users with good-looking design, advanced technology, stable quality and reliable;
Reference customer is all over the world, from Asia to Europe, from Africa to America.
Development purposes is to be top leader in renewable energy utilization and development;
Exploring MAX Power of Nature!